BGHXJ - EPOXY POLYAMIDE PRIMER, PT-A
- MSDS: BGHXJ
- Manufacturer: RANDOLPH PRODUCTS CO
- Product Name: EPOXY POLYAMIDE PRIMER, PT-A
- National Stock Number: 8010-01-048-6539
Product Identification
Product ID:EPOXY POLYAMIDE PRIMER, PT-A
MSDS Date:01/01/1987
FSC:8010
NIIN:01-048-6539
Kit Part:Y
MSDS Number: BGHXJ
Responsible Party
CARLSTADT, NJ 07072
Emergency Phone: 201-438-3700
Info Phone: 201-438-3700
Cage: 77672
Contractor
Telephone: 201-438-3700
Cage: 77672
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 1-10%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
VM&P NAPHTHA (LIGROINE)
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 1-10%
OSHA PEL 300 PPM/400 STEL
ACGIH TLV: 300 PPM; 9192
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 20-30%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
2-ETHOXYETHYL ACETATE (CELLOSOLVE ACETATE) (EGEEA)
CAS: 111-15-9
RTECS: KK8225000
Fraction By Weight: 1-10%
OSHA PEL S,100 PPM
ACGIH TLV: S, 5 PPM; 9192
MAGNESIUM SILICATE HYDRATE
CAS: 1343-90-4
RTECS: OM4360000
Fraction By Weight: 15-20%
STRONTIUM CHROMATE (SARA III)
CAS: 7789-06-2
RTECS: GB3240000
Fraction By Weight: 19-23%
OSHA PEL 0.1 PPM CRO3;CEILING
ACGIH TLV: 0.0005MG CR/M3;A2;93
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Explanation of Carcinogenicity:CHROMATE(+6) COMPOUND IS A LISTED
CARCINOGEN.
Effects of Overexposure:SOLVENT VAPORS MAY CAUSE
DROWSINESS,HEADACHE,DIZZINESS & IRRITATION OF EYES,NOSE AND THROAT.
First Aid
First Aid:INH:REMOVE TO FRESH AIR,CONSULT PHYSICIAN; EYE/SKIN:FLUSH
WITH PLENTY OF WATER.
Fire Fighting
Flash Point Method:TCC
Flash Point:20F/-6.67C
Lower Limits:0.9
Extinguishing Media:SAND,FOAM,CO*2,CHEMICAL
Fire Fighting Procedures:USE AIR SUPPLIED RESCUE EQUIPMENT FOR ENCLOSED
AREAS. COOL EXPOSED CONTAINERS WITH WATER TO PREVENT EXPLOSION DUE
TO PRESSURE.
Unusual Fire/Explosion Hazard:PREVENT FIRE,KEEP AWAY FROM HEAT,SPARKS
AND OPEN FLAMES.
Accidental Release
Spill Release Procedures:REMOVE SOURCES OF IGNITION,WEAR APPROVED
RESPIRATOR,CONTAIN SPILL WITH INERT SUBSTANCES(SAND,DIRT).PUT
MIXTURE IN CONTAINERS FOR DISPOSAL.KEEP SPILL OUT OF SEWERS & OPEN
BODIES OF WATER.
Handling
Handling and Storage Precautions:KEEP TIGHTLY CLOSED & KEPT AT WELL
VENTILATED AREAS.
Exposure Controls
Respiratory Protection:WEAR MESA/NIOSH APPROVED RESPIRATOR WHERE VAPOR
CONCENTRATIONS ARE ENCOUNTERED.
Ventilation:EXPLOSION PROOF EXHAUST
Protective Gloves:NEOPRENE
Eye Protection:CHEMICAL SPLASH GOGGLES
Other Protective Equipment:BOOTS,COVERALLS,ETC.
Supplemental Safety and Health
KEY1:F3.
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:173-273F
Vapor Density:>1
Spec Gravity:1.25
Evaporation Rate & Reference:< ETHER
Appearance and Odor:LIQUID
Percent Volatiles by Volume:60
Stability
Stability Indicator/Materials to Avoid:YES
NONE STATED
Stability Condition to Avoid:HOT,OR OPEN FLAMES
Hazardous Decomposition Products:NONE STATED
Disposal
Waste Disposal Methods:ACCORDING TO CURRENT LOCAL,STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.